Cybergate 1.07.5 Download + Setup Guide

Hi all so here's a little tutorial on how to install Cybergate.

Things you'll need:
CyberGate 1.07.5 - Download by Clicking here
No-ip
Crypter (You buy one or try to find an FUD one for free)
So first of all, you need to extract Cybergate 1.07.5, it should look like that:

http://screensnapr.com/e/q1193L.jpg

Next, you need to go to: http://www.no-ip.com/ and register a new account.
Once it's done, you go to Add a host:



You enter your information like this (Note i deleted my ip put it should be urs):


Then you confirm that.
After, you need to go there: http://www.no-ip.com...ds.php?page=win
And download the software.
Open it, log in and click Select Hosts.
It should look like that:


Check your no-ip and click save.
Congratz! Ur no-up is now ready.

Now, you need to open your port in your routor.
It all depend of your routor brand so you search on good for that or ask the community, if you need help, i can try to help you with that. But please, keep in mind the port your opening.

Now, open Cybergate 1.07.5
Wait for the TOS then accept it.
Click Control Center and click start.
Then click Control center again, builder and create server:



Click New and write what ever name you want.
Then click Forward at the bottom right.
It should look like that:



Select the 127.0.0.1 and click delete.
Change the password to 123456 and press add.
Now in the box, write your no-ip then : your port.
For exemple:


Then press Ok.
In the Installation tab, make your settings like these:



**Press both random button like 5 to 10 times each to habe a new hash**
Now go to the Anti-Debug tab.
Click Check all at the bottom.
Now for the Create Server Tab:



Then press Create Server and save it somewhere with the name you want.

Congratz! You setuped your first RAT! Now all you have to do it's to buy a Crypter or Find a free one and crypt your server. Remember, you want it to be FUD!